



Filter Pack Premium
A&S 300
This Filter Pack Premium is made of :
- Medical grade HEPA filter : HEPA signifie High Efficiency Particulate Matter, capable de filtrer en un seul passage des particules fines inférieures à 0,3 microns
- Activated carbon filter : YesPorous structure with high absorption power which fixes and retains VOCs and odors.
This product
is adapted to :
Air Purifier Premium
Description
The A&S 300 Premium air purifier has the particularity of being the only purifier in the range to have a photocatalysis function with 2 UV lamps. Photocatalysis combines the action of UV lamps and a catalyst to transform chemical and microbiological pollutants into water vapor.
The A&S 300 Premium filter pack consists of two other filters in addition to photocatalysis:
- A medical grade Hepa filter, level H13, which means that it filters 99.95% of the ultra-fine particles present in your indoor air. An ultra-fine particle is a particle that measures up to 2.5 microns which corresponds to about 1/40th of the diameter of a hair.
- Finally, the activated carbon filter will act on VOCs (Volatile Organic Compounds) and on odors present in the air.
The action of these different filters allows to improve the quality of the air you breathe.
Technical Characteristics
Anti-microbial pre-filter | NO (included in the A&S 300 Premium air purifier) |
---|---|
Medical grade Hepa 13 filter | YES |
Activated carbon filter | YES |
Siez | 420 x 325 mm |
Air purifier type | A&S 300 Premium |
Tips & Advices
The A&S 300 Premium air purifier has an indicator light that shows when you need to change the filters. Depending on your usage, you will need to change them after 6 months or one year.
To know how to change your filters, you can check it in our advices section on the website AIR ET SANTÉ.
As a reminder, your A&S 300 Premium air purifier is also equipped with a sensor that measures the number of fine particles in the air and activates the air purifier when the air is polluted. For the proper functioning of your air purifier it is important to clean the sensor chamber every two months.
For the proper functioning of the photocatalysis, you should also change the UV lamps when they are no longer working.